- Joined
- Dec 21, 2012
- Messages
- 185
- Reaction score
- 211
I never had a problem with batch priming. Kegging is even easier, though.
Beautiful carb in my cider, thanks! Next time I will likely go with a touch more sugar (I tend to like my beers and ciders on the higher end of the carb levels) but I'm stoked with how it turned out. Now I just wish I bottled more than 10 bottles!
edit: forgot to ask this question:
You mentioned using brown sugar to carb as well. Have you tried this in a cider? I know there won't be any sweetness contributed but I'm wondering if it contributes any sort of a molasses flavor at all? Thanks again!
Brown sugar should be ok - I used to use it quite a bit and can't remember any off notes from it.
But I did a stout years ago with a pound of black molasses at FO and it had a hint of blood in the finish that took away from the beer all the way to the end. No - didn't dump it over that - it was otherwise a great stout
Cheers!
I never had a problem with batch priming. Kegging is even easier, though.
So I'm a bit confused by the on line calculators and whatnot involved with bottle conditioning. I've been away from brewing a few years, and prior to that I was only kegging so I'm not very experienced at bottling. Now I'm back and have 6 gals of what hopes to be a nice IIPA SMaSH that just about ready for the keg/bottle.
I'd like to start kegging roughly 4 gals and then bottle the remaining 2 gallons. As these numbers are fairly imprecise it seems bottle priming might be my best solution. I visited the More Beer priming calculator and saw that the lowest calculation variable was measuring per gallon, and that there's a variable for fermentation temperature. So I plugged in the following...
Bottling two gallons at 80° fermentation for a 2.2 vol of CO2 = 49.01 grams of corn sugar (I'm in my garage and the temp is around 80° give or take)
Two gallons equals 256 ounces, which yields roughly eleven and a half 22 ounce bottles (11.63 bottles). If I divide the 49.01 grams over the 11.63 bottles, that should be 4.2 grams of corn sugar per 22 ounce bottle.
That seems a bit light as compared to the comments listed above. Am I doing something wrong? I could totally be screwing this up, and there may be a better on-line calculator that I'm not finding, so any advice would be greatly appreciated.
Thanks in advance!
Thanks for your input, I'll be measuring the weight of the sugar when it comes in tomorrow. The 4.6 grams sounds about right.4.6 grams of table sugar is about the right amount for a 22oz bomber. (two 2.3 gram sugar cubes) Corn sugar probably takes a little more, but not much more. And if you're using corn sugar you will want to weigh it because it's fluffy.
Just last week I weighed the sugar using several different kitchen measuring teaspoons and they were all different; some by quite a bit. I picked the one that was closest to the grams I wanted and used it. (it was the cheap stamped aluminum one I bought 30-ish years ago)
Enter your email address to join: