I have for sale a barely-used Blichmann Tower of Power Controller. This is for the direct fire gas system, NOT Electric. It's in near mint condition, no scratches or anything. This is only the controller. No stand, no data cable.
I was planning on using this as part of a pilot system for our brewery, but this fun machine would not end up being used as originally intended.
$500 for the setup
Local pickup in Seattle, WA or $20 shipping in the cont US.
PM For additional info or photos. Cheers!
=====================
The gas TOWER of POWER control module includes the following features:
Class A precision RTD temperature sensor. The sensor can be installed in BrewMometer hole in your kettle for an HLT or into any 1/2" NPT fitting with the included adapter bushing
Pilotless electronic ignition control system that adapts to any burner (natural gas or propane), not just those produced by Blichmann Engineering. This ignitor will instantly relight your burner if blown out by a wind. It will also shut down your gas if a flame is not detected within 10 seconds and sound an alarm. It includes an industrial ignition electrode and high-quality silicone sheathed ignition wire.
American-made gas solenoid valve (installs on your burner gas supply)
Convenient cable storage tray in the back of the enclosure to neatly store wires between brew days
Plumbing to connect the gas regulator to the burner
Data port for optional remote monitoring and mash-profile programming (unlimited profiles) on your PC (Optional communication cable required)
One decal for MASH and one for HLT for appropriate labeling
Compact enclosure of 4.25"W, 7"H, 7"D that is easily integrated into your brew system
Brushed stainless cover and gloss black powder-coated case that will look beautiful for years
The TOWER of POWER temperature control module from Blichmann Engineering is like nothing on the market! This RIMS system temperature control module is high-quality and ultra-high accuracy! It also bears the Blichmann Engineering hallmark of simplicity! Offered in gas or electric, these controllers work in concert with our suite of equipment options to complete your Blichmann Engineering system or act as a freestanding control powerhouse!
We have developed this modular control system in much the same way as our modular TopTier brewing stand for adaptability and the ultimate in quality.
MODULARITY
Purchase a single control unit for your mash tun, one for your hot liquor tank, or both! Already have a pump and all the plumbing for your system? No problem! All you will need are the control units. Should you need the pump and plumbing in a compact and convenient freestanding configuration, the control stand can be purchased separately. And the TOWER of POWER control stand even bolts to our TopTier stand with the optional mounting kit!
PRECISION & ACCURACY
We aren't kidding when we say the TOWER of POWER offers superior precision and accuracy. The control module will hold your mash within +/- 0.5°F (0.28°C). With this level of precision, repeatable with your beer will become the norm in your home brewery.
For accuracy and precision, you need both a high-quality sensor and a high-quality meter that can read it. The TOWER of POWER uses a Class A precision RTD and a high-quality metering circuit found in PIDs and PLCs. Only the TOWER of POWER delivers that level of accuracy - so accurate and precise you can use it to calibrate your other instruments!
AUTO RAMPING
With the TOWER of POWER control module, ramp times are fast and automatic, with outstanding control and easy maintenance of +/-0.5°F (0.28°C) stability. Free TOP-Link software and optional communication cable can be purchased to easily program an unlimited number of mash profiles and even monitor and log data on your PC. This level of automation brings reproducible results every time, taking your home brewery to the same level as a professional brewery.
I was planning on using this as part of a pilot system for our brewery, but this fun machine would not end up being used as originally intended.
$500 for the setup
Local pickup in Seattle, WA or $20 shipping in the cont US.
PM For additional info or photos. Cheers!
=====================
The gas TOWER of POWER control module includes the following features:
Class A precision RTD temperature sensor. The sensor can be installed in BrewMometer hole in your kettle for an HLT or into any 1/2" NPT fitting with the included adapter bushing
Pilotless electronic ignition control system that adapts to any burner (natural gas or propane), not just those produced by Blichmann Engineering. This ignitor will instantly relight your burner if blown out by a wind. It will also shut down your gas if a flame is not detected within 10 seconds and sound an alarm. It includes an industrial ignition electrode and high-quality silicone sheathed ignition wire.
American-made gas solenoid valve (installs on your burner gas supply)
Convenient cable storage tray in the back of the enclosure to neatly store wires between brew days
Plumbing to connect the gas regulator to the burner
Data port for optional remote monitoring and mash-profile programming (unlimited profiles) on your PC (Optional communication cable required)
One decal for MASH and one for HLT for appropriate labeling
Compact enclosure of 4.25"W, 7"H, 7"D that is easily integrated into your brew system
Brushed stainless cover and gloss black powder-coated case that will look beautiful for years
The TOWER of POWER temperature control module from Blichmann Engineering is like nothing on the market! This RIMS system temperature control module is high-quality and ultra-high accuracy! It also bears the Blichmann Engineering hallmark of simplicity! Offered in gas or electric, these controllers work in concert with our suite of equipment options to complete your Blichmann Engineering system or act as a freestanding control powerhouse!
We have developed this modular control system in much the same way as our modular TopTier brewing stand for adaptability and the ultimate in quality.
MODULARITY
Purchase a single control unit for your mash tun, one for your hot liquor tank, or both! Already have a pump and all the plumbing for your system? No problem! All you will need are the control units. Should you need the pump and plumbing in a compact and convenient freestanding configuration, the control stand can be purchased separately. And the TOWER of POWER control stand even bolts to our TopTier stand with the optional mounting kit!
PRECISION & ACCURACY
We aren't kidding when we say the TOWER of POWER offers superior precision and accuracy. The control module will hold your mash within +/- 0.5°F (0.28°C). With this level of precision, repeatable with your beer will become the norm in your home brewery.
For accuracy and precision, you need both a high-quality sensor and a high-quality meter that can read it. The TOWER of POWER uses a Class A precision RTD and a high-quality metering circuit found in PIDs and PLCs. Only the TOWER of POWER delivers that level of accuracy - so accurate and precise you can use it to calibrate your other instruments!
AUTO RAMPING
With the TOWER of POWER control module, ramp times are fast and automatic, with outstanding control and easy maintenance of +/-0.5°F (0.28°C) stability. Free TOP-Link software and optional communication cable can be purchased to easily program an unlimited number of mash profiles and even monitor and log data on your PC. This level of automation brings reproducible results every time, taking your home brewery to the same level as a professional brewery.
