StroudCreek
Well-Known Member
- Joined
- Oct 15, 2012
- Messages
- 107
- Reaction score
- 24
A little info about the build, the bottom shelf is just a pice of plywood. The base for the motor and the mill, is a stair tread cut into 2 pieces, glued together as well as screwed together from the bottom using a Kreg Jig. You must have a top that's flat and very rigid. The spacers under the mill were machined from 1/2” by 2.5” aluminum bar stock. The table frame came from Harbor Freight, I’ll provide the link. This is the second mill I've built using the All American Ale Works motor, it's the 180 RPM motor, these motors are by far the best mill motor I've came across. The mill is a Monster Mill MM-2 Pro with heat treated rollers and a half inch, keyed shaft.
https://www.harborfreight.com/universal-tool-stand-69805.html
https://www.harborfreight.com/universal-tool-stand-69805.html
Attachments
-
IMG_2569.jpg563.9 KB · Views: 240
-
IMG_2570.jpg653.5 KB · Views: 249
-
IMG_2571.jpg595.6 KB · Views: 231
-
IMG_2573.jpg616.8 KB · Views: 280
-
IMG_2577.jpg849.2 KB · Views: 246
-
IMG_2578.jpg712 KB · Views: 239
-
IMG_2579.jpg702.4 KB · Views: 242
-
IMG_2580.jpg531.9 KB · Views: 224
-
IMG_2581.jpg848.5 KB · Views: 240