Can you share the name of the kit? The recipe and process description will help the discussion.
What are you planning to do for fermentation temperature control?
Here is the recipe for Bavarian Hefeweizen. I also plan on doing temp control in my basement.
BAVARIAN HEFEWEIZEN
Official NORTHERN BREWER Instructional Document
Extremely popular in its homeland of southern Germany, Weizenbier (wheat beer) is now being enjoyed all over the world. Medium-bodied, refreshing, and tolerant of high fermentation temperatures, weizen is a fantastic summer brew. Northern Brewer’s Hefe-Weizen is 100% traditionalcloudy, tart, a bit sour, with a phenolic and banana-clove character imparted by the yeast. To serve authentically, “mit hefe” (with yeast), pour almost all the beer into a tall glass, swirl the bottle, and add the rest.
O.G: 1.049 READY: 4 WEEKS
2 weeks primary, 2 weeks bottle conditioning
KIT INVENTORY:
MAILLARD MALTSTM EXTRACTS & OTHER FERMENTABLES
- 6 lbs Wheat malt syrup split addition (60 and 15 min)
- 1 lbs Wheat dry malt extract late addition (15 min)
HOPTIMUS REXTM PREMIUM HOPS & OTHER FLAVORINGS
- 1 oz German Tettnang (60 min)
YEAST
- Dry Yeast (default): Fermentis Safbrew WB-06. Optimum temp: 59°-75° F
- Liquid yeast option: Wyeast 3068 Weihenstephan Wheat. Optimum temp: 64°-75° F.
PRIMING SUGAR
- 5 oz Priming Sugar (save for Bottling Day)
These simple instructions are basic brewing procedures for this Northern Brewer extract beer kit; please refer to your starter kit instructions for specific instructions on use of equipment and common procedures such as siphoning, sanitizing, bottling, etc.
For more detailed extract brewing instructions, please visit
www.northernbrewer.com
BEFORE YOU BEGIN ...
MINIMUM REQUIREMENTS
- Homebrewing starter kit for brewing 5 gallon batches
- Boiling kettle of at least 3.5 gallons capacity
- Approximately two cases of either 12 oz or 22 oz pry-off style beer bottles
UNPACK THE KIT
- Refrigerate the yeast upon arrival
- Locate the Kit Inventory (above) – this is the recipe for your beer, so keep it handy
- Doublecheck the box contents vs. the Kit Inventory
- Contact us immediately if you have any questions or concerns!
PROCEDURE
A FEW DAYS BEFORE BREWING DAY
1. Remove the liquid Wyeast pack from the refrigerator, and “smack” as shown on the back of the yeast package. Leave it in a warm place (70–80° F) to incubate until the pack begins to inflate. Allow at least 3 hours for inflation; some packs may take up to several days to show inflation. Do not brew with inactive yeast — we can replace the yeast, but not a batch that fails to ferment properly. If you are using dry yeast, no action is needed.
ON BREWING DAY
2. Collect and heat 2.5 gallons of water.
3. Bring to a boil and add 3 lbs Wheat malt syrup (about half the 6 lb container). Remove the kettle from the burner and stir in the Wheat malt syrup.
4. Return wort to boil. The mixture is now called “wort”, the brewer’s term for unfermented beer.
- Add 1 oz German Tettnang hops, and boil for 60 minutes.
- Add the remaining 3 lbs of Wheat Malt Syrup and 1 lb Wheat dry malt extract 15 minutes from the end of he boil.
5. Cool the wort. When the 60-minute boil is finished, cool the wort to approximately 100° F as rapidly as possible. Use a wort chiller, or put the kettle in an ice bath in your sink.
6. Sanitize fermenting equipment and yeast pack. While the wort cools, sanitize the fermenting equipment fermenter, lid or stopper, fermentation lock, funnel, etc along with the yeast pack and a pair of scissors.
7. Fill primary fermenter with 2 gallons of cold water, then pour in the cooled wort. Leave any thick sludge in the bottom of the kettle.
8. Add more cold water as needed to bring the volume to 5 gallons.
9. Aerate the wort. Seal the fermenter and rock back and forth to splash for a few minutes, or use an aeration system and diffusion stone.
10. Optional: if you have our Mad Brewer Upgrade or Gravity Testing kits, measure specific gravity of the wort with a hydrometer and record.
11. Add yeast once the temperature of the wort is 78°F or lower (not warm to the touch). Use the sanitized scissors to cut off a corner of the yeast pack, and carefully pour the yeast into the primary fermenter.
12. Seal the fermenter. Add approximately 1 tablespoon of water to the sanitized fermentation lock. Insert the lock into rubber stopper or lid, and seal the fermenter.
13. Move the fermenter to a warm, dark, quiet spot until fermentation begins.
BEYOND BREWING DAY, WEEKS 1–2
14. Active fermentation begins. Within approximately 48 hours of Brewing Day, active fermentation will begin there will be a cap of foam on the surface of the beer, the specific gravity as measured with a hydrometer will drop steadily, and you may see bubbles come through the fermentation lock. The optimum fermentation temperature for this beer is 64–75° F – move the fermenter to a warmer or cooler spot as needed.
15. Active fermentation ends. Approximately one week to two weeks after brewing day, active fermentation will end. When the cap of foam falls back into the new beer, bubbling in the fermentation lock slows down or stops, and the specific gravity as measured with a hydrometer is stable, proceed to the next step.
BOTTLING DAY—ABOUT 2 WEEKS AFTER BREWING DAY
18. Sanitize siphoning and bottling equipment.
19. Mix a priming solution (a measured amount of sugar dissolved in water to carbonate the bottled beer) of 2 / 3 cup priming sugar in 16 oz water. Bring the solution to a boil and pour into the bottling bucket.
20. Siphon beer into bottling bucket and mix with priming solution. Stir gently to mix—don’t splash.
21. Fill and cap bottles.
1–2 WEEKS AFTER BOTTLING DAY
22. Condition bottles at room temperature for 1–2 weeks. After this point, the bottles can be stored cool or cold.
23. Serving. Pour into a clean glass, being careful to leave the layer of sediment at the bottom of the bottle. Cheers!