TNTgill
Well-Known Member
Could someone smarter than me make sure this looks ok. This will be plugged into a 50amp GFCI outlet. I don't have the dspr1 hooked to power yet as I ran out of disconnects. The switch is what kind of threw me as I tried to use the diagram from auber on wiring the switch and contactor (which is a 240v coil). Ideally the red led should be on when the controller is powered up. There green led is when the element is firing. I used left over ground from the contactor to the SSR (I know prolly not idea). The blue wire to the LED is 14g (I ran out of 18g) is that ok?