brum
Well-Known Member
I moved into a house that doesn't have enough room to keep my envisioned setup so time to liquidate the parts I have collected so far. I am located in Indianapolis and can travel a little ways to meet buyers.
Ebrewsupply 2 PID 50A kit - $450
https://flic.kr/p/23vvEWt
https://flic.kr/p/2e3jgYQ
https://www.adafruit.com/product/1287
- mounted in large enclosure with lights/switches already mounted
- Planned for the 10" screen to be run with a Raspberry Pi with Brewtarget running
- Components are mounted on DIN rail
- labels included
- total retail for package is ~$500
- I will throw in some wire and miscellaneous supplies I have.
Bottom drain mash tun - $100 https://flic.kr/p/23vvEAP
- Triclamp fitting and elbow
HLT - $125 https://flic.kr/p/2d1VWz9
- Has thermometer
- Drain
- Sightglass
Virgin Keggle - $50
- No holes drilled
- Top cut out
Stainless fittings (from brewhardware.com)
https://flic.kr/p/2cJ75Cg
- (7) 1/2" NPT Female/female couplings - $10
- (1) 1/4" NPT Female/female couplings - $2
- (2) 2" inch radiused solder on triclamp fittings with clamps - $25 ea
Shaker table - $100 https://flic.kr/p/2cJ74mi
- can hold (4) 1L Erlernmeyer style flasks
Buckets - $20 for 4 https://flic.kr/p/RYSrVs
Misc $20 https://flic.kr/p/RYSrNJ
- Capper
- Caps
- Racking cane
- Scale
- Mash Paddle
- Funnels
Glass Carboy - $20
Maltmill Grain Mill - $125 https://flic.kr/p/RYSte9
- Mounted on stand
Willing to do some discounting on purchasing multiple things.
Thanks!
Ebrewsupply 2 PID 50A kit - $450
https://flic.kr/p/23vvEWt
https://flic.kr/p/2e3jgYQ
https://www.adafruit.com/product/1287
- mounted in large enclosure with lights/switches already mounted
- Planned for the 10" screen to be run with a Raspberry Pi with Brewtarget running
- Components are mounted on DIN rail
- labels included
- total retail for package is ~$500
- I will throw in some wire and miscellaneous supplies I have.
Bottom drain mash tun - $100 https://flic.kr/p/23vvEAP
- Triclamp fitting and elbow
HLT - $125 https://flic.kr/p/2d1VWz9
- Has thermometer
- Drain
- Sightglass
Virgin Keggle - $50
- No holes drilled
- Top cut out
Stainless fittings (from brewhardware.com)
https://flic.kr/p/2cJ75Cg
- (7) 1/2" NPT Female/female couplings - $10
- (1) 1/4" NPT Female/female couplings - $2
- (2) 2" inch radiused solder on triclamp fittings with clamps - $25 ea
Shaker table - $100 https://flic.kr/p/2cJ74mi
- can hold (4) 1L Erlernmeyer style flasks
Buckets - $20 for 4 https://flic.kr/p/RYSrVs
Misc $20 https://flic.kr/p/RYSrNJ
- Capper
- Caps
- Racking cane
- Scale
- Mash Paddle
- Funnels
Glass Carboy - $20
Maltmill Grain Mill - $125 https://flic.kr/p/RYSte9
- Mounted on stand
Willing to do some discounting on purchasing multiple things.
Thanks!