leandrocosta
Well-Known Member
- Joined
- Jan 14, 2015
- Messages
- 250
- Reaction score
- 33
I'd like to build a counter pressure filter based on the BYO's 2005 project, and since this is a very old project I'd like to know if there is a modern, better project available.
These are the components I'm planning to use:
1/4 stainless steel tees (2): https://goo.gl/yC2Nig
1/4 stainless steel ball valves (2): https://goo.gl/mtLaUt
1/4 stainless steel needle valve (1): https://goo.gl/97MK2U
1/4 threaded 1/4 compression fitting (2): https://goo.gl/TVzWtB
1/4 threaded 3/8 compression fitting (1): https://goo.gl/MKMCsK
1/4 - 8mm barbed fittings (2): https://goo.gl/68jGdr
1/4 stainless steel tubing (16 inches)
3/8 stainless steel tubing (6 inches)
This is how I'm planning to use them: https://goo.gl/biqL6v
These are the components I'm planning to use:
1/4 stainless steel tees (2): https://goo.gl/yC2Nig
1/4 stainless steel ball valves (2): https://goo.gl/mtLaUt
1/4 stainless steel needle valve (1): https://goo.gl/97MK2U
1/4 threaded 1/4 compression fitting (2): https://goo.gl/TVzWtB
1/4 threaded 3/8 compression fitting (1): https://goo.gl/MKMCsK
1/4 - 8mm barbed fittings (2): https://goo.gl/68jGdr
1/4 stainless steel tubing (16 inches)
3/8 stainless steel tubing (6 inches)
This is how I'm planning to use them: https://goo.gl/biqL6v