Hey All,
Hoping I could get some advice. I came across some Visi-Coolers for sale, to use as a fermentation fridge for my conical, similar to Imbera VR12 (https://www.imberacooling.com/global/vr-12-2). The cooler I am looking at is equipped with an Elstat ems55advanced which controls the fans, lights, and compressor. I was looking at the users manual and there are a bunch of different parameters to make this controller work. Some of the parameters are self explanatory others are not (e.g. defrost activation temp., defrost interval, defrost duration, freeze-up protection, defrost termination temperature).
I plan on using this cooler in conjunction with a Ink-Bird ITC-308.
MT
Hoping I could get some advice. I came across some Visi-Coolers for sale, to use as a fermentation fridge for my conical, similar to Imbera VR12 (https://www.imberacooling.com/global/vr-12-2). The cooler I am looking at is equipped with an Elstat ems55advanced which controls the fans, lights, and compressor. I was looking at the users manual and there are a bunch of different parameters to make this controller work. Some of the parameters are self explanatory others are not (e.g. defrost activation temp., defrost interval, defrost duration, freeze-up protection, defrost termination temperature).
I plan on using this cooler in conjunction with a Ink-Bird ITC-308.
- Does anyone have any advice/setpoints that should be targeted on the ems55; I plan on having setpoint at 40 deg. F with a 3 deg. F differential and energy saving mode disabled.
- Is there an alternative to the ems55 that will allow for simpler configuration/operation of the cooler?
- Is there an alternative configuration that would simplify fermentation/operation (e.g. somehow wiring up only the ink-bird to control the compressor)?
MT