I'm needing to build a confetti cannon. I've done this before, but with a full sized SCBA tank w/ regulator and some jury rigged fittings on the hose, which went into a flat PVC end cap on the pressure chamber.
I want to use a 5 lb CO2 tank and my Taprite regulator. I prefer not to use a tire valve in the end cap; I want to use a threaded fitting so that I can leave the hose attached.
Which hoses and fittings would you DIYers recommend going from the regulator to the chamber, keeping in mind that the system will be pressurized at 100 psi.
Sent from my iPhone using Home Brew
I want to use a 5 lb CO2 tank and my Taprite regulator. I prefer not to use a tire valve in the end cap; I want to use a threaded fitting so that I can leave the hose attached.
Which hoses and fittings would you DIYers recommend going from the regulator to the chamber, keeping in mind that the system will be pressurized at 100 psi.
Sent from my iPhone using Home Brew