That STC-1000 should do the trick. Put the probe in a low alcohol spirit and see if that works. Thats how i have mine set up in my Keezer. Love this build btw. very original! Cheers!
can you find a brass cover plate? I'd strip it and let it tarnish a bit. It would look more like it came with the radio than the just plain white plastic cover plate.
It's a cool idea for sure.
can you find a brass cover plate? I'd strip it and let it tarnish a bit. It would look more like it came with the radio than the just plain white plastic cover plate.
It's a cool idea for sure.
perfect! Makes it look like it came with it.
can you squeeze a working speaker in that thing and hoop up an ipod and play some old time tunes
So here's the last week.
Massive amountd of hand-wet sanding between many coats of finish.
I thought that I was going to save time with a poly and stain in one. Boy, was I wrong. It streaked and ran....needless to say, I will not be using it again. I finially got enough coats on where I could wet sand with a 120 grit sponge and sand down the peaks and streaks to get an almost even finish.
Once I got the finish as even as I could get it, I began the actual clear poly satin finish, Lightly sanding with 00 steel wool between each coat. Here it sits as of tonite. 3 coats of clear on the top and 2 on the sides. The doors have the original finish with 1 coat of the tinted polystain. Once completely dry, I will sand and clear.
Now for a beer. Still working on empting the keg in the fridge that i need to tear apart to use in this project.
And a shot of the bike as well. Cheers!
Enter your email address to join: