- Joined
- Oct 12, 2020
- Messages
- 2,164
- Reaction score
- 2,754
Since I'm tagging @Bobby_M in this, Let me say to you Bobby; I love your products and if it weren't for living in Canada I'd do all my equipment shopping from your site. This is one of those thoughts that may after the fact be one of those "Why'd nobody do this before?!" (or it may not, let's see if others weigh in with interest..) Your True Bulkheads, and Hot Pods are some of those things that fill the niche for for many of us, I've always assumed they are your own design and you've either made them yourself or contracted your own design. I've also strongly suspected that the Big C camlock is just a type B that has had the threads lathed into a barb.. I'm wondering if you could do something like that to a SS splicer, mainley this one:
https://www.brewhardware.com/product_p/splicebarb14x38.htmor something close, and machine down the small-side barb to 6.35mm and cut the ring into it like the duotight shanks or carb caps, so that we can just use a short piece of hose out our regulators to this adapeter for duotight fittings?
https://www.brewhardware.com/product_p/splicebarb14x38.htmor something close, and machine down the small-side barb to 6.35mm and cut the ring into it like the duotight shanks or carb caps, so that we can just use a short piece of hose out our regulators to this adapeter for duotight fittings?
Last edited: