Search results

hello guys, so i got my control unit installed and fully functioning. i have it hooked up for air temp inside the unit, i have it set by 5 degree swing and 3 minute delay. should i set it so that it cools to 37 degrees and shuts off and warms up to 42 degrees to turn on? or should i set it so...

thanks for the input everyone. well my kegorator was around 500 bucks so getting a $200 controller seems a little silly, im not in the brewing stages yet, im just trying to drink tap beer. so the A419 should suit my needs. but im still not sure if i want it in liquid temp or air temp. *EDIT*...

do you have the probe submerged in liquid? im still not sure if i should do that.

hello guys, so i go to pour some beer today and got nothing, i looked at the keg and disconnected the coupler and saw some ice under the coupler. i have a Haier Kegorator with a cooling fan installed and a tower cooler. i have been using the factory temp controller, but its time to upgrade to a...

nice, i hope your going to install a tower cooler or your going to have some warm pours. also my haier ran like crap until i installed a circulation fan inside.

when the beer pours into the cup it sounds like a soda bubbling when i put it to my ear. when i put in the keg i was still trying to adjust temp so at one point the keg was down to 30 F with the pressure at 13 psi.

the first beer is always flat and then the rest are ok, but its not even 5 mins later the same thing happens again. i purged the keg completly. also when pouring the i feel its like spitting out the beer its not pouring down smooth.

ok so turn off the co2 and purge the keg completly and then turn the co2 on? or should i do it with the co2 already on?

any way to correct that problem or does everybody have the foam on the first cup?

maybe after 10 mins i get foam again but not as much. did i overcarbonate the beer when i first had it set at 13 psi? i think my beer line is about 6" long i dont know if thats ok but its twisted inside the fridge but its not kinked or anything.

just got a new haier kegorater, i had it for almost a month now, the temp is set at 35 F liquid temp and pressure is set to 10psi and i did the 1/2 copper pipe modification to the tower and it extends into the fridge about 5 inches, and the beer is michelob lager 1/2 bbl the problem is when...

nice russian scopes on the bottom

hahah ^^^ that would be badass to watch

yea i understand, well thanks for the help guys. i really love this forum, im so happy i got a kegorater, soon i will start brewing up my own batches.

its funny you say that, i have already put a tip jar and and out of order sign lol. if it was somebody who appreciates beer i wouldent mind, but this guy just pounds natural ice all day, he doesent care what he drinks. maybe a tap lock is what im thinking of right now.

just got a new kegorater, well we have a family friend who comes and visits our house often, well lets just say if i keep this beer keg tapped the keg wont last long enough with him around . so i decided to untap the beer and close the co2 little shut off valve, so when we decide to drink i just...

^^ thank you thats the answer i was looking for.

so what do people use to know the current temp in there fridge?

thanks alot for the responses guys, but i was just using a kitchen thermometer probe in the water. its not connected to the unit, im still using the factory haier temp control system. as long as i dont open the fridge too much it wont form any ice on the plate, i was shooting for maybe 37 to 38...

hello just got the haier kegorater, did the modification to the temp unit, on the coldest setting i can get it to 29 degrees but thats too cold, now after so many turns of this unpredictable knob i got it to 37 degrees. these measurments with a temp probe in water. it has been consistant for 2...