Search results

Hey all. Is there any sort of HTML/CSS (only), run from your own computer, digital taplist solution out there? I've tried the whole Raspberry Pints thing, but could never get it working. Thanks in advance.

Lots of dust in the brew area. Anyone know of any sort of kettle dust cover out there? At least 18 inches diameter and 21 inches tall? Thanx in advance.

As pertains to the co2 regulators, is there anything special I would need for a 35# tank? Stroke of luck picked up this bad boy for less than $100 bucks on my local CL. Still new. Had it tested and it's gold! Just want to make sure the standard dual dial regulator I have now will work without...

So, been using Spike CF conicals for a while now and have always had stability issues when moving while full. Being a 3 leg conical and spaced really close together, when the conicals are full, then tend to tip when you move them around. Well, after a bit of planning, I have implemented a...

Getting ready to purchase 6 Inkbird C206T temperature controllers for my fermenters, but need to know if anyone knows of an extension cable that might work with the temperature probe cable. I've heard of others modifying other Inkbird controllers by cutting the wire, then splicing in a longer...

Been googling for a while now and just can't find the type of part in which I'm interested. A type of pipe/pole/post bracket that has two opposing (at 180°) bars/rods/shelves perpendicular to the vertical pipe/pole/post angle. The portion of the bracket that connects to the pipe/pole/post can be...

Looking for a Chapman 20 Gallon ThermoBarrel Mash Tun.

Anyone out there ever try to find a 16-inch round or square (preferably round) silicone mat? I've been searching forever (I know), but still can't seem to find it...searching so long now, I'd even go with hot pink if I could find it. (lol) Looking for these to place between my table and the...

Changing some things out in the brewery and am stuck deciding which way to go with temperature controllers. What are people doing that are utilizing separate heating and cooling controllers as pertains to the probes? I am using a glycol chiller that has its own probes for the cooling portion...

Looking for caps/covers for male 1/2" Quick Disconnect fittings... Do these exist? I've been searching all over the innerwebs for a product like this or even something that is close to it and would work, but the closest I've found is caps/covers for hydraulic QDs. Unfortunately, those don't...

Looking for a mesh basket for inside my MLT to make cleanup a bit easier. Like BIAB, but with the basket instead of a bag. Ideally, the diameter would be 15 inches, the height would be 17 inches, and have 2 1/2 inch legs or lift of some sort to keep it above the pickup tube. I've been googling...

So, I've finally pestered the wife enough to where she's finally given in and is allowing me to build the brew shed / bar in the back yard. :ban: Persistence is key, right?! (lol) Anyway, I have enough room in the back corner of the yard for a 12' x 16' shed. I've spent hours looking at...

So, I'm in the process of building a new brew rig. I've attached a drawing of what I'm thinking about doing. Does this make sense? Does a CLT make more sense than separating the MLT into MT and LT? Would you configure the system differently? If so, how? Just want to get some feedback from you...

Looking for ideas for the creation of an enclosed grain mill (where the milled grain would drop into the bucket) or an existing product. Trying to find a way to reduce or eliminate the dust while milling. Suggestions? Thanks.

Recently picked up a MaltZilla Grain mill and wow! Works better than any mill I've tried previously. Anyway, I'm putting out some feelers to see if anyone knows where I could pick up a hopper that would work with this mill. Ideally, it would hold at least 20 pounds of grain. The insertion into...

Just can't figure out how to do this without having to drill through the table or something of the like. Has anyone done this before? Any alternative to "damaging" the table? Thanks in advance.

On recommendation of a friend, I picked up a Vittles Vault yesterday for my grain storage. Looks like a really great way to store grain in an air-tight, pest-free way. When I returned home and opened it to pour in the grain, I noticed quite a powerful odor...assumably a by-product of the...

Hoping one of you brewgineers can help me out and let me know if this would work. I was planning on Frankensteining my own chiller system. A small chest freezer containing 20 gallon container of glycol mixture. Multiple submerged pumps, managed by inkbird controllers, to feed a submerged coil...

Looking at purchasing the Kegco KM11GM-3R Grain Mill with 11 lb. Hopper and 3 Rollers, but also need a motor for it. Are there any out there for under $50 that would work with this mill? If so, does anyone recommend any specific motors? Thanks in advance.

Here's what I have planned... All fluid transfer connections are positioned at zero degrees at the front of the kettles, while the heating elements are positioned at 135 degrees (BK) and at -135 degrees (HLT). Does it make a difference as to the positioning of the fluid transfer connections...