Zion_Zack
Active Member
Hey HBT!
I'm almost done building my 8.8 cu ft keezer but want to ask a couple questions before I push forward. The 2x6 pine collar (polyurethane coat) is held together with gorilla glue and corner brackets. However it doesn't sit flush on the keezer- it's off by about half an inch. I plan on using an adhesive to bond the collar to the body. Do you recommend liquid nails or silicone? (I have this at home http://www.homedepot.com/p/GE-Silicone-II-10-1-oz-Clear-Kitchen-and-Bath-Caulk-HD5040-24C/100663319). We also thought a shim could help.
I want to stick the collar to the body of the keezer, and weigh it down for a day or two with the lid on and placing a few filled cornies and a 20lb co2 tank on the corners of the lid.
Also what is the best way to cut that 1" pink foam board for insulation? Dremel or box cutter? Thanks for the feedback!
I'm almost done building my 8.8 cu ft keezer but want to ask a couple questions before I push forward. The 2x6 pine collar (polyurethane coat) is held together with gorilla glue and corner brackets. However it doesn't sit flush on the keezer- it's off by about half an inch. I plan on using an adhesive to bond the collar to the body. Do you recommend liquid nails or silicone? (I have this at home http://www.homedepot.com/p/GE-Silicone-II-10-1-oz-Clear-Kitchen-and-Bath-Caulk-HD5040-24C/100663319). We also thought a shim could help.
I want to stick the collar to the body of the keezer, and weigh it down for a day or two with the lid on and placing a few filled cornies and a 20lb co2 tank on the corners of the lid.
Also what is the best way to cut that 1" pink foam board for insulation? Dremel or box cutter? Thanks for the feedback!