WIBrewer83
Well-Known Member
I have about $2,500 invested in this setup. Im looking to sell as a package for $1,250 (half). For now, local pickup in the SE Wisconsin area. If I can't find anyone local, I will update the post with a shipping option. Thanks for checking it out!
...sorry about the list below, many are sub-bullets, but I couldn't figure out how to do that on here...
...sorry about the list below, many are sub-bullets, but I couldn't figure out how to do that on here...
- Bayou Classic 15.5g stainless steel pot
- Includes a basket, which is perfectly sized for BIAB (bottom of the basket sits above the heating element)
- Camlock fittings for recirculating mash and whirlpool port (purchased from BrewHardware.com)
- 3 silicone hoses for recirculating mash, whirlpooling and chilling into the fermenter
- Sight glass with brewhardware thermometer
- Top of the line heating element (5500W SS Ripple)
- http://www.theelectricbrewery.com/heating-element-kits
- BIAB bag fit to the kettle from WilserBrewer Bags
- http://biabbags.webs.com/
- 240V electric brewery controller
- This controller has one 30A twist-lock outlets and is able to control one up to 30A 240V load (heating element)
- It also has a standard 120V outlet to control up to 5A pump. Just an On/Off manual control.
- Heating element can be controlled by a PID to keep temperature stable or can be manually controlled (infinite control) to apply desired power.
- Infinite power control of high energy heating elements
- Integrated PID Controller for precise automatic control
- Quick disconnect temperature probe
- Sound and visual alarm can be programmed for any over or under temperature.
- Designed to control a single vessel Brew in a Bag (BIAB) System
- Can also run a 3-Vessel HERMS system. HLT temp is dependent on mash temp.
- Can be wall mounted or used as a counter-top control panel.
- In case of automated PID control you can adjust power on element from 0 to 5500 Watt to avoid grain scorching.
- It's equipped with 40A rated SSR.
- Controller has current overload protection and SSR overheating protection.
- Support Celsius or Fahrenheit display mode
- Controller can be plugged to 3 or 4 wires 240V 30Amp or 50Amp outlet. In case of 3 wire outlet - 120V pump receptacle will not work.
- Recirculating stainless steel Chugger pump
- Plumbed with camlock disconnect fittings
- Integrated temperature probe to be used with the brewery controller
- Both temp probe and plug connect to the brewery controller
- 7g SSBrewTech conical fermenter with temperature control system
- This setup keeps your fermentation temperatures exactly on set temperature .its an awesome fermenter!
- https://www.ssbrewtech.com/collections/fermenters/products/7-gallon-chronical
- https://www.ssbrewtech.com/collecti...ing-chilling-7-gal-standard-edition-chronical
- Huge plate chiller
- This chiller will bring your boiling wort to pitching temperatures as fast as you can pump
- https://www.dudadiesel.com/choose_item.php?id=HX3620BWGH
- 5g ball lock kegs (3)
- Hop Spider (with bag)
- 6 Vortex power fan
- Best fan on the market for pumping brew smells out of your house
- Comes with a controller
- http://vortexpowerfans.com/vtx-600
- Oxygenation kit
- http://www.northernbrewer.com/oxyge...0l3dTKj9thzVO1d5iLhP8MvK1KAS696BoCvhAQAvD_BwE