Search results

Wtf

The 3 plastic washers need to be touching the fermentor ,the pointer needs to be touching the grommet on the outside section so when you spin the spigot on the outside it moves along with the wracking section on the inside the 3 washer's allow for the this part to spin. So if the spigot is...

Sorry so late....lol

I use Quick disconnects for everything

Oh and I did not support from the back

Just go slow while drilling. If you have to bit spinning at top speed you actually melt the plastic. Don't press too hard just let the bit do all the work. And don't put too much thought into it it's actually very easy, just be sure you don't make too big of a hole.

So you're coming out of the box with two 120 VAC, one neutral, one ground?

Hey PJ quick question if you can respond I'm looking at your diagram and getting a little confused at the color coordination with the wires I'm using 10/3 wire from 3 prong dryer outlet 30 amp and want to use the same set up. Can you explain which color is ground and which colors are hot I'm...

Needed to add a couple more faucets to the kegerator. So I picked up an old ammo can and drilled some holes in it.

Did some thinking and decide to go ahead and build the control panel. It will be basic at first but I plan to build it up well. I was getting anxious, and wanted to try it out wired just to the spa panel. so far the set up is a 10 GAL HLT w/5500w element 10 gal cooler MT/LT 15.5 gal (keg) BK...

I plan on running off of the trusty dryer outlet as we'll. I bought about 30' of 10/3 sjoow 300v wire to plug to said dryer outlet; will run that to a spa panel. Am I able to use the same wire to run from the spa direct to the element? I am not using a control panel yet, and with current setup...

I drilled it my self. I used a step drill bit . no problems with the plastic . it is very thin though

So here it is, the Big mouth bubbler with the Better Bottle simple flow spigot with racking adapter

only took two days two days to carb. Gotta love wheat on tap.

Cant believe i got it for free

Yea. Northern brewer came up with them. You should check them out.

Sorry, I wasn't looking for a solution, I was just surprised to see it get that cold, and wanted to brag a bit about this awesome kegerator thats almost as old as my self. I've already adjusted temperature

I filled my keg with Star San and left it for a couple days. When preparing to keg some beer, i emptied out the star San and noticed a film or cloudiness left in the keg. Is this ok? When I mix up star San with tap water, it gets cloudy after a day. So far I haven't noticed any bad flavor...

I just filled a keg last night , put it in the kegerator and turned the knob to the coldest setting. When I opened the door to check the temperature it's read 24°. I had the door open for a bit so the temperature raised now it reads 28°. This kegerator is not new it's probably over 25 to 30...