Search results

The original install was with the Lite version as I planned on running headless, but there were tons of dependencies missing for various things that I kept running in to and having to install, so rounds 2 and 3 were with a desktop environment. I used the Pi Imager tool and selected this OS.

Yeah, sorry. I couldn't figure out a better way to format it yesterday. I don't comment here much. Here is the out put for those 2 commands. pi@brewpi:~ $ cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)"...

Not sure if this is an issue specifically related to my setup or not, but figured I would post here in case it helps anyone else. I am running a Pi 2 and had been running a very old build of the OG BrewPi for the past few years. It recently started to fail when loading the web page, so I...

Do you have any photos of this? I just put a spigot in my Fermonster and this is the first beer I have done with it. Was planning on doing a closed transfer to a keg but was concerned about clogging. Hoping the cold crash will compact the trub below the spigot. Was looking at options on...

Awesome. I will definitely give that a try. I had a chance to do some additional testing tonight and have determined that it is definitely an issue with the serial connection not being released from the VM when I unplug the Arduino. If it is running on ttyACM0 and I unplug it, it will almost...

I agree. It definitely sounds like it just cannot find the serial link on reconnect. Is that 99-arduino.rules file something I have to create? I only have one for vmware in that directory.

OK. I just tried restarting the script again and for some reason, it worked! I then reboot the VM and it came back up fine as well. So I guess the question is, why is the script not recognizing it when it first powers on?

I have let it sit for almost a full day after plugging it back in (it's current state actually). I have tried restarting the script as well. The only thing I have not done is restarting my VM.

Here are the steps I am going through. 1. Make sure brewpi script is running 2. Upload Hex file using web interface 3. Install the devices and change the temp setting from Celsius to Fahrenheit 4. Set the beer temp constant on main page Everything up to that point works great. The graph...

Yes, it does hand the Arduino back over to the VM, but sometimes it uses a different port. It is usually ttyACM0, but will sometimes come back up to ttyACM1. It should be fine since the altport is specified as ttyACM1 in the config.cfg file. To answer the previous question, yes, I have...

Just tested. Uploaded first code. Completed successfully. Uploaded second code. Checked serial monitor and said Found 0 eeprom errors. Unplugged, plugged back in, checked serial monitor and it said Found 0 eeprom errors. So it appears the board is good. Could it possibly be a permissions...

The syntax error was on the first post. It looks correct in the attached PDF. I just edited the line Serial.print("Found Serial.print(bad_count); to Serial.print("Found ");Serial.print(bad_count);

Thanks for the test files. I just ran through them from my remote connection to my PC back home without unplugging to test them out and noticed the problem in the second sketch, but figured out the correct syntax. I will try testing with the unplug in between when I get home tonight...

Long time lurker here hoping someone can shed some light on an issue I am having with my Arduino Uno. I set up BrewPi on a Debian Wheezy install on VMWare Workstation. Everything seemed to go fine on the install and the web page is working great. I can program my Arduino via the web and it...

Batch Size: 5.50 gal Boil Size: 6.57 gal Estimated OG: 1.040 SG Estimated Color: 3.9 SRM Estimated IBU: 21.5 IBU Brewhouse Efficiency: 70.0 % Boil Time: 60 Minutes Ingredients: ------------ Amount 7.00 lb Pale Malt (2 Row) US (2.0 SRM) 0.75 lb Cara-Pils/Dextrine (2.0 SRM) 0.50 lb...