Search results

Selling my trusty brewstand, building an electric set up in my basement. Professionally welded stand with casters 3 - BG 14 burners Honeywell gas valves on HLT and Mash Tun burners with pilot safety Manual gas valve on all 3 burners. Low pressure regulator. Holes drilled in stand for...

I was e-mailing the guy from Auberins (very helpful) about the creep in temperaure I get in my mash tun after the burner shuts off. He said that he's heard of people setting the control up on PID (opposed to on/off). You just have to use a longer cycle rate. I was going to play around...

Here's my brewstand build. Fairly standard set up. I used BG14's coverted to low pressure lp and used Honeywell's and Auberins controllers for the MLT and the HLT. The small tank mounted between the kettle and the mash tun is a coffee percolator that I converted to a HERMS tank with a 1500W...

I did a couple searches and couldn't find the answer. Is the utility grade soft copper tubing ok to use on gas lines? I bought the L type for my pilot burners, but it didn't fit the compression fittings that came with it, so I used the utility grade. I'm debating between flex connectors...

I've read that you can't use compression fittings when using copper tubing for gas, but in alot of the brewstand pics people are using something that looks alot like compression fittings. Is there another type of fitting for this application? Or do you just need to solder the connections? I...

I'm working on converting my 10" banjo's to low pressure propane. I drilled out the orifice to .067" and I'm getting blue tips, but just want to be sure this is about the max power I'm going to get or if I should keep tweaking. The flame seems to surge in and out a bit too. I've been using a...

I'm trying to convert the 3 10" banjo burners I bought to low pressure propane so i can automate the brewstand I'm working on. I put together a low pressure regulator with a Marshall 2 stage regulator and drilled out the brass orifice to about .090", which according to the charts should be...

After alot of thread reading, it sounds like if I want to run a 10 psi regulator on my brewstand w/automation my only choice for pilot flame safety is the expensive and difficult to find Baso h19 valve. (correct me if I'm wrong) So, I'm considering converting my banjo burners to low pressure...