Well I took off the condenser fan motor and it literally crumbled into pieces.
I got the part number from Delfield(very helpful girl in parts dept) and I was able to source a supplier locally.
So a $50 part and I have a working freezer /fridge that is ideal for lagering, kegging , and storing...
Thanks
I ran it today and it got real cold then the condenser fan did not cycle like it is supposed to.( I knew this when I bought it-seller said he put a floor fan pointed in the back to keep it from getting too hot)
I need to check the fan to see if it gets power and is energized when it is...
It fits 2 full size kegs . Cornies that have the black rubber on top and bottom do not fit bummer.
I can fit about 3 pails no problem. Will post pictures in daylight soon.
I picked this up off Craigslist to use for a garage kegerator/fermentation chamber. The casters were rusted stuck and had deformed . First order was to get new casters . Zing! I can now move it around to start sanding it to get a decent shine off that stainless. I will try to document my...
Here is another picture of my brew sculpture .
I like the swing out arm for the control panel. It makes it easy to swing it out of the way when I am doing some stirring etc. and it is not in the way ever. I got that idea from someone here.
Another tip:
Where is your 24 vac neutral?
From your picture it seems that the 8vac and 16vac get combined to make 24 vac but I 'm curious to see if you need to tap off the middle lug off your xformer
How are you measuring 24vac?
From the picture of your barrier strip, I notice you have some jumpered and some are isolated. Looks like you are shorting out your ac and causing some kind of out of phase loop.
Without burning out another xformer, I would trace continuity through each barrier strip contact to see what and how...
This door chime xformer ...these multiple output voltages it can produce would make me highly suspect.
I would set your multimeter to VAC and measure the 2 output lugs with everything disconnected.
If you are not getting 24 vac, then the output of the xformer needs to be modified, jumpered, or...