One of the black wires on the original therm was not hot and was only for the door light. I ran a jumper between terms 1 & 7 and it’s working now. Thank you everyone for their help.
Okay. I got the new therm today. Plugged it in like the above and the display turned on. I set the compressor delay to 0 however the fridge hasn’t turned on! No light or anything. This is the fridge i connected it to. Same wiring layout as all the pictures i attached. Any thoughts?
Black...
Thanks. So you’re saying my 2 black wires go to terminals 1,6 & 8, i need to splice my white wire to go to terminal 5 & 7, and 2. Where does my red wire go?!
So are you saying the wiring should be the following?
Black wires to terms 1 & 8
Red to term 7
White to spliced to term
Or are you saying to switch the spliced white wire with one of the blacks?
Thanks for the heads up. How do you suggest I wire it exactly?
I was following the diagrams and steps in these threads.
The 2 black wires go to terminal 1 & 7
The red wire goes to terminal 8
Splice off the white wire from the light to go to terminal 2
The diagram in the pic on amazon looks...
Doh. I guess that would do it. Don’t know how i didn’t notice that. Probably because I bought it a year ago.
This one would be okay though right?
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays...
I have a Danby 4.4 freezerless fridge and want to put my STC -1000 controller in place of the stock thermostat. I found many posts with the exact same wiring diagram that’s in my fridge.
I took the black wires and ran them to terms 1 & 7. Took the red wire and ran it to term 8. Spliced the...