Recent content by Sidman

This brewery was originally a propane set up but I live in Houston and its hot! I still have the propane stand - it is big and has wired outlets for pumps and a high pressure regulator for really strong heat. I ended up building this out with a BCS460 control panel and mostly followed the...

20 Gallon Spike solo brewery with controller. Does not come with pump but I do have connecting hoses.

I couldn't find the first line. I already have a pi so I named this one rpints but did not see a .config directory. I did find the second and that line is there. I assume there is supposed to be a space between the chromium and -- correct?

I believe the version is Bullseye as I chose the Legacy with Desktop and Software download link. I found the f11 - thanks for that. As far as the orientation I wanted to keep the horizontal row style set up but was contemplating having my monitor rotated to fit more lines. similar to the...

Just installed Rpints after losing it a couple of years ago. The work you guys did to make install so much easier is fantastic. Thank you for that effort. I have run into two issues: Even though I chose Yes in the command prompt for auto start, It is not auto launching and I end up having to...

Hey Day_trippr - Do you know if this flow meter would work for Rpints? This might be more appropriate on another thread but I feel like you have a lot of knowledge on a lot of things on here. I had a working Rpints but accidentally overwrote the sd card. I went and downloaded the newest Pi...

Found this pic on the ipourIt website. That's got to be them. Looks like theRj45 line only has 4 wires. Guessing that's two for the flowmeter and two for operating the diaphragm. Must be some other control circuit that also acts as an interface to monitor and control as mentioned in several...

Here are some additional pics - pretty basic. Seems like power and data from flow meter.

Thanks, I have 22 of these things - must be a commercial version of something like that. Cheers as well!

Hello all, Thanks in advance for any help you can give. Got some of these at a restaurant auction with a bunch of sanke D taps. Was hoping to find out what the "official" name was for it and confirm what it does. The top round piece with the blue nsf label appears to be a flow measurement...

Appreciate it and you Kegland! I have one of the extensions for the 65l and I see that you have a taller malt pipe for the extension. Does it have the same type of screen at the bottom?

Curious if anyone has modded their malt pipe for gen 3 version to have filter holes along the sides at the bottom like the gen 4 malt pipe? I have a ton of batches in on my 65l v3 and it recirculates beautifully for a 5 gallon batch but really struggles with a decent og 10 gallon batch. I have...

Thanks for this. I did read your review and appreciated it. Can I ask you one other thing, what are your dimensions for the mm3 base. Like H x W x D. I am trying to compare my set up to the mm3 in hopes to use their hopper. Thanks again!

Hey all, I've been using a three roller mill that has the ability to adjust the non driven roller as well as the bottom roller. Just had a brew session with really poor efficiency and thought I would go back to check the settings. I adjust the lower roller closest to the driven roller at .39...

Interested. Have an old bcs panel. any idea where the probes came from and / or their coeffiecients? Thanks, Sid