Recent content by sidewinder1987

Added some small changes moved my digital sign and made it not stand out as much added a larger drip tray and added my new sign

Yes exactly I figured I would spend the extra money and if I didn't have it dialed it just slow it down for good pours and I can't even seem to do that

Why would 2 of the taps pour fine and the other not with the same length tubing though?

A lot of the commercial beer companies are going to 1/8 barrel now like labatt Blue Light u can only get in 1/8 barrel personally I'd rather have 1/6 because my keezer will accommodate them the 1/8 are the same size while having a plate welded in that keeps less ounces next time I get one out of...

Anyone know how will you can store it shouldn't be more than a month I would geuss

Yes just for my usage I started framing out the built in look for the tray and ik the moldings would get covered in beer and it's easier to just pull the tray out fast and clean and wipe the wood that is flat and smooth clean. I may upgrade to a larger drip tray it's barely big enough for the taps

ok great thank you

I agree with you on the monitor I just had it laying around that's why I used it I will have to come up with something. I do have a stainless drip tray it's only pictured on the last couple pics and a stainless bottle opener lol and I'm stuck with th a tap handles the way they are now lol

I'm still new to it and don't really understand the inkbird that well but what would you suggest for a temperature range wouldn't it run more frequently with a tighter range? I have it set at 36 with a 5 degree range now so when my water reaches 41 it kicks on until it gets to 36 if I understand...

Thanks!! I ran it for quit a while previously and felt the sides often and I never felt any heat coming out I also have my ink bird set up very modest with a 5 degree swing and a 10 minute delay. From my reading before on another thread they had said that the wood was a horrible insulator and...

cnc sign going to make on a little larger to replace it with Another picture from inside Can anyone explain why they think my one tap handle is off so much from the other two that are perfect in line they are all the same size dimension wise but the last one needs to come forward about an...

Set up an old monitor with taplist io to play with and try out The rats nest inside all insulated with a fan to move air around. I also have a thick class of water insulated that the temp probe from my inkbird goes into to keep a pretty accurate reading. All the beer lines used were the push...

Large collar built so I can set keg on the hump as well as have enough room to set glasses on the drip edge The color was built out of black walnut with the top being maple. I originally wanted to use the lid but I just couldn't get it to work right and be at neat of a look. I did use the lid...

This is a dandy 5.5 chest freezer to start with First up was a rolling base for it Next it was time to start framing it in everything was done with a kregjig Next I attached some hardwood tongue and groove maple to the exterior it wa also built so the freezer can be removed if I...

Hi I finished my keezer andhave not gotten into the home brew setup yet I'm buying my kegs from a distributor about 40 mins from me and my keezer only accepts 1/8 and 1/6 barrel which the distributor keeps cold. Can I buy a couple spares to keep on hand and store them at room temperature until I...