Recent content by rubiconbrewer

Yes me too...but I'm mainly interested a clone in their Pineapple Papaya Fandango. I assume the base would be a Berliner weisse but I'm unsure...new to kettle sours.

This is a great idea. That would definitely be a perfect mod for quick adjustments between wheat and a normal grain bill. Thanks for sharing Bobby! Looking forward to testing the RIMS tube system that you just shipped to me!

Awesome, thanks I will have to look for the video to see if it helps me out with it.

You have no problem getting the feeler gauge in between the rollers? I'm used to using a 2 roller mill (barley crusher) and it was pretty straight forward in that you just put the feeler gauge between the two rollers. The video I saw online showed having the hopper taken off and putting the...

I suppose it won't be a big deal in the long run, I've just been playing with the gap to see what works best for my system. And yes it would be nice to make adjustments quickly for wheat.

You can still adjust it, it's just hard getting the feeler gauges in to get between the drive roller and the bottom idlershaft.

Hey guys, I recently bought a 3 roller geared monster mill with their hopper. I didn't realize you had to remove the hopper to adjust the gap of the rollers. Anyway I was wondering if anyone has installed some sort of hinged trap door so you do not have to remove the whole hopper? If so I'd...

Perfect thanks! Okay. I should be fine then, i'm about 14" from center of pump head to bottom of lowest valve. Yep just looked at the pictures from my first and only use of the pump and now I see why I had a heck of a time....inlet was facing up...

Thanks fusa! I got them on ebay. I bought the pack of 20 so I have several extras They also sell a pack of 10. I was also thinking of welding caps on as well. But decided that was too much extra work...

Yeah forgot that I took pictures before and after I switched the output to facing up. Other than the location of the output should it work good from this location? I didn't know if the pump would work better down lower or if it made a difference as long as you were below the lowest valve.

Almost done! Just need to trim the legs to the step down a bit. I don't have much experience with pumps. Would it work ok if I mounted my pump how it is now or is that not low enough? Was even thinking of mounting it with it mounted upside down on the bottom side of the shelf. Any tips would...

Finally made a little more progress. Shelf and bottoms are basically done. Got the mounting brackets for the blichmann burners welded on. Still need to find a good place to weld on pump bracket and weld on a hinged step.

I have well water and it works great with a little diluting and some small brew salt additions. Yeah I would send a water sample in to ward labs like everyone else is saying. I did that a while back and really have my water profiles dialed in. Otherwise try making a batch. A good...

Looks good! Have you tested it out yet?

Thanks for all your help! I ended up buying some expanding casters from castercity. I talked to the owner on the phone, he was very helpful. Its coming along. We had some warping going on because of the stainless pulling from the heat but I think it will be fine. Unfortunately had to make a...