Recent content by RensM

Put a new keg on tap today and despite all my kegs being corny style and all entered in the system as such, for some reason the image is different any ideas why? all are 5 Gal ball lock

Sorry slow answer Life got in between :-) Anyways https://www.aliexpress.com/item/1005006243514513.html?spm=a2g0o.order_list.order_list_main.22.70021802qH6mJn are the ones I used

Finally managed to get it all stuck together and running now as I like it. Just need to bring my beer stock back up so I don't have 2 empty taps.

I was testing with a Pi zero and had the software running during test but only using one tap at a time (would not really happen any other way in my home setup) was planning on using the zero w but as it does not drive the display i had in mind ended up using the pi 3B i also had. I did note...

Got is sorted it was a Arduino board issue, replacement board, no other changes other than a fresh install fixed it. Now i just have to hone in on pulse count. I stuck a random number in and a 500ml poor now registers as 1.2l so some trial and error needed unless someone has a pulse counting...

Running sudo /etc/init.d/flowmon status works and gives: the rpint log contains an error relating to the Arduino: RPINTS: reflashing Arduino failed, moving on anyways, error was: Command '/usr/share/arduino/hardware/tools/avrdude -C/usr/share/arduino/hardware/tools/avrdude.conf -patmega328p...

So I connected the Arduino uno on USB did a fresh install with the "curl -L install.rpint.com | sudo bash" said i'm using flow meters and using USB to communicate. Now am I right in understanding this will also push the right sketch into the arduino and the Taps pin selection corresponds to the...

Indeed.... I started off and failed with the original :-) Much more success with the @RandR+version. Flow meters and Arduino uno arrived today, so more playing to do before moving to integration soon (depending on results)

Hi all, first post, exhausted reader... after seeing a RaspberryPints install on Facebook, I wanted something like that for my 4 tap series X kegerator... I ended up on raspberrypints.com and wasted a weekend trying to make it work on bullseye. I knew basic pi and learned a lot in those two days...