Recent content by hiflying31

Looks good trying to upgrade my system. Do you know what size and where did you get your enclosure from?

What size control box did you use

I start with Kal plans witch able me to build my control box and a ton of questions I had was answer from your site. With my box I want to save a little money as well has making it a little easier to build this where I am at sorry for no tags but I can run one at a time and a key switch got to...

any update

looks great I like it being sealed up

can you in it backwards? yes however u need to rewire the motor to run that is one reason I used puley if it dose jam I can take my belt off and move the larg wheel by hand

That's great to hear that it is up and running what is going to be your first batch of beer with it?

jatebell sorry for the few days was under the weather so to wire your motor open the wire case mount the green wire onto the ground stud it is marked white wire Connect P1 then black wire T2 T4 T5 the remaining leads P2 T3 T8 connect them together test rotation before hooking up to system also...

I used the same motor if you Google the motor it will give u the info for wiring ccw and cw if u still have an issue let me know I'll poat what mine is wired has Cheers Sent from my SAMSUNG-SGH-I747 using Home Brew mobile app

my first idea was to use a instant hot adj for steam with direct injection but did not want to keep adding water to my kettle or mash tun I was afraid of the close loop systems due to the explosive potential what is your view on using a boiler that has been set up for steam heat for a house add...

this is some real great info gives some new light to my "shed" project of a one barrle size system My main dely was the fact of needing two heater element to power the boil kettel great work so far looking fwd to updates

that is a great deal Sent from my SAMSUNG-SGH-I747 using Home Brew mobile app

QUOTE=Wreck99;5913632]Subbed. I'd like to motorize my monster mill too. Just unsure how to proceed. I used this to help me with getting started http://byo.com/component/k2/item/1166-motorize-your-grain-mill-projects

I am just about done building my Mill I used the 1/2hp general duty motor from harbor freight. works great I can fill my Hopper and then turn it on and it powers though the grain, I use pulleys 1 1/2 in on the motor and 11 in on my Mill I used the jsp with gear driver I have one issue I am...