Brewer's Friend 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
4 taps, with homemade tiger wood drip tray.

4 taps, with homemade tiger wood drip tray.

  • 0
  • 0
moved kegs out so you can see the manifold mounted in back. Just got a secondary regulator and gonna have the 6 cut down to 2 3ways so i can run high and low

moved kegs out so you can see the manifold mounted in back. Just got a secondary regulator and gonna have the 6 cut down to 2 3ways so i can run high and low

  • 0
  • 0
put back tray, 4 lines running through to taps. 3 beer and one pop

put back tray, 4 lines running through to taps. 3 beer and one pop

  • 0
  • 0
drilled through hole for CO2 line. IMPORTANT - I drilled from the inside first, (in case I ran into freon lines, the outside wouldnt look like swiss cheese as I hunted for a place without the lines) just going through the plastic and feeling around in the

drilled through hole for CO2 line. IMPORTANT - I drilled from the inside first, (in case I ran into freon lines, the outside wouldnt look like swiss cheese as I hunted for a place without the lines) just going through the plastic and feeling around in the

  • 0
  • 0
attached board to shelf brackets for mounting 6way manifold

attached board to shelf brackets for mounting 6way manifold

  • 0
  • 0
removed drawers and replaced with a shelf to give extra clearance for kegs and QC/hoses

removed drawers and replaced with a shelf to give extra clearance for kegs and QC/hoses

  • 0
  • 0
placed couplings in, supported from fridge compartment and sprayed expanding foam insulation back in, be careful as the foam sticks to everything, you'll see later pics where the foam is still stuck to the pvc

placed couplings in, supported from fridge compartment and sprayed expanding foam insulation back in, be careful as the foam sticks to everything, you'll see later pics where the foam is still stuck to the pvc

  • 0
  • 0
fans placed in and just before wiring. Used the wiring for the light, took out the light switch and wired in the 2 fans

fans placed in and just before wiring. Used the wiring for the light, took out the light switch and wired in the 2 fans

  • 0
  • 0
here is the fan, $25 @ radio shack p/n 273-242

here is the fan, $25 @ radio shack p/n 273-242

  • 0
  • 0
attached fans, one with air flow up, one down

attached fans, one with air flow up, one down

  • 0
  • 0
Did a hatchet job with dremel cutting out center, gotta be careful doing this (bought clamps AFTER this job lol )

Did a hatchet job with dremel cutting out center, gotta be careful doing this (bought clamps AFTER this job lol )

  • 0
  • 0
cut out 2 plexiglass for fan inserts ( I had it lying around and it was thin enough )

cut out 2 plexiglass for fan inserts ( I had it lying around and it was thin enough )

  • 0
  • 0
krugvoll

buildingmykegerator

my kegerator as it progresses, still tweaking it
Click to expand...
There are no comments to display.

Album information

Album owner
krugvoll
Date created
Item count
17
View count
245
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

krugvoll

krugvoll

Media items
0
Albums
0
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top