scubatech
Active Member
- Joined
- Oct 29, 2020
- Messages
- 33
- Reaction score
- 3
Guys, I need help with setting up my Duotight digital in-line regulator since there was no instruction and I haven't been able to find anything specific online.
I recently purchased a Duotight in-line regulator to go in my keezer. I took out the analog guage and replaced it with the digital version. No problems there. The line from my secondary is running in the correct direction as well. I am trying to set it to push a kegged wine out at 1 or 2 psi but can't seem to get that to happen. I can't seem to find step by step instructions on how to make that happen.
Here are my steps so far:
1. Keg has no pressure
2. Opened CO2 tank and set secondary to 20 psi (just a random number)
3. Attached quick disconnect to keg and turned on digital in-line reg (yellow knob is turned all the way to the right, in as far as it can go).
4. Opened secondary and I can hear gas going into the keg and digital guage reads 20 psi (thought the knob should keep gas from entering the keg in that position?).
5. When I turn the knob to the left (out) nothing really happens. Pressure doesn't go down to 1 or 2 psi. Doesn't move at all.
6. Even tried this in reverse with the knob starting in the far left position and turning right. It's pretty obvious that doesn't and shouldn't work.
Just can't seem to figure out how to get the digital reg from a high pressure to a lower serving pressure without having to change the secondary that is sitting at 20 psi.
Maybe someone has the same setup or experience using these things......or maybe I got a bad regulator ( I've read that does happen).
Thanks for any help you can give.
I recently purchased a Duotight in-line regulator to go in my keezer. I took out the analog guage and replaced it with the digital version. No problems there. The line from my secondary is running in the correct direction as well. I am trying to set it to push a kegged wine out at 1 or 2 psi but can't seem to get that to happen. I can't seem to find step by step instructions on how to make that happen.
Here are my steps so far:
1. Keg has no pressure
2. Opened CO2 tank and set secondary to 20 psi (just a random number)
3. Attached quick disconnect to keg and turned on digital in-line reg (yellow knob is turned all the way to the right, in as far as it can go).
4. Opened secondary and I can hear gas going into the keg and digital guage reads 20 psi (thought the knob should keep gas from entering the keg in that position?).
5. When I turn the knob to the left (out) nothing really happens. Pressure doesn't go down to 1 or 2 psi. Doesn't move at all.
6. Even tried this in reverse with the knob starting in the far left position and turning right. It's pretty obvious that doesn't and shouldn't work.
Just can't seem to figure out how to get the digital reg from a high pressure to a lower serving pressure without having to change the secondary that is sitting at 20 psi.
Maybe someone has the same setup or experience using these things......or maybe I got a bad regulator ( I've read that does happen).
Thanks for any help you can give.