MisterThirsty
Member
- Joined
- Feb 21, 2017
- Messages
- 5
- Reaction score
- 0
Hi.
I recently purchased two 3.6L min kegs and a faucet/regulator connection that serves off 16 gram C02 cartridges.
Like this one.
Was wondering if anyone had experience with these, and what kind of pressure you run them at.
Keep in mind there is only about 12 inches of tubing from the keg body to the faucet, so it doesnt have the 8 feet of resistance tubing I would normally install on a short draw draft system.
So far it is serving blonde ale at 2.5 vol at 5-8 PSI at normal fridge temps of about 4C OK, but it's too foamy.
Any advice appreciated.
Cheers.
I recently purchased two 3.6L min kegs and a faucet/regulator connection that serves off 16 gram C02 cartridges.
Like this one.
Was wondering if anyone had experience with these, and what kind of pressure you run them at.
Keep in mind there is only about 12 inches of tubing from the keg body to the faucet, so it doesnt have the 8 feet of resistance tubing I would normally install on a short draw draft system.
So far it is serving blonde ale at 2.5 vol at 5-8 PSI at normal fridge temps of about 4C OK, but it's too foamy.
Any advice appreciated.
Cheers.