MisterClean
Well-Known Member
So I have 3 kegs ona distributor block. 2 of them are fine, but one (an ale) is pushing a ton of foam. The stout and hefe are just fine.
Im serving at 12psi with 5ft lines. The stout keg hss bern on the longest(3-4 weeks), and is nearly tapped, the ale not as long(2-3 weeks) and the hefe is the newest at 1 week.
My beers are also having kind of a goldilocks head. The hefe is not enough, the ale is too much, and thr stout is just right.
I went ahead and raised thr keezer temp from 39 to 42, turned the reg down to 10psi and bled off some excess from the ale and stout. Anything else I should do, othrr than extending the ale line? I do have more beer line on order.
Im serving at 12psi with 5ft lines. The stout keg hss bern on the longest(3-4 weeks), and is nearly tapped, the ale not as long(2-3 weeks) and the hefe is the newest at 1 week.
My beers are also having kind of a goldilocks head. The hefe is not enough, the ale is too much, and thr stout is just right.
I went ahead and raised thr keezer temp from 39 to 42, turned the reg down to 10psi and bled off some excess from the ale and stout. Anything else I should do, othrr than extending the ale line? I do have more beer line on order.