lombard
Well-Known Member
So I'm hoping someone here can help. I've got four primary regulators (overkill, I know, considering I only have four taps), but I'm having the same problem with all of them. They're all reacting very slowly when I try to set the pressures for my kegs. Basically, I'll try to set them to 8-12 psi, depending on the beer, but if I come back a few days later, the pressure will have drifted up to 15-20 psi.
I had to swap out my CO2 tank the other day, and when I vented the pressure to disconnect the tank (I have a 6 ft high pressure hose between the tank and the regs), I saw a bunch of particulate spray out (maybe ice or even dry ice from inside the regs). The regs are mounted inside my keezer and my tank is outside.
Thoughts?
I had to swap out my CO2 tank the other day, and when I vented the pressure to disconnect the tank (I have a 6 ft high pressure hose between the tank and the regs), I saw a bunch of particulate spray out (maybe ice or even dry ice from inside the regs). The regs are mounted inside my keezer and my tank is outside.
Thoughts?