Search results

JB weld should never be used to pot electrical connections. It contains metal and metal conducts electricity. when it got hot enough the epoxy started to break down as an insulator.

All gone thanks to all that responded.

I have Nugget and Cascade for free you just pay shipping. I have a good amount of each from well established plants. Just cut thees today so they need to go soon. Shipping will be priority flat rate boxes.

Welcome to HBT :mug:

Welcome !!!:mug:

Welcome!!!

Welcome !!

In short NO. Each element will pull 13 amps. Most household outlets are 15 amps so two elements will be way more than an outlet can handle. Power strips can only handle 15 amps.

I do lift it out. I have the help of my dad and we lift it out. There is no damn way that I would lift it by my self. Than I chill like all ways with an ic.

Since I don't have a big enough burner for my keggle I improvised some. Using a wood fired 55gal drum I was able to heat 13 gal from sparge to boil in 5 min. I can heat 13 gal from 55 to boil in 25 min. Boil justa rollin :ban: Massive boil with a little boil over. oops didn't get the...

Its a type g coupler. http://www.micromatic.com/product.aspx?pid=GTL425

McMaster Carr

Check to make sure the posts are on the correct position. The gas in post has notches cut on the wrench corners. The liquid side does not. It sounds like you may have switched the posts around.

That really does look like a firestone post. One way to tell is if the post has 19/32-18 threads on both posts its cornelius. If its 9/19-18 on the gas and 5/8-18 on the out its firestone. The poppet looks like a cornelius.

On the outside use just the gasket that came with the element. On the in side use a o-ring with the Bargainfittings nut .

I like it and I like the fact that the stroke of the cylinder will allow for slight variances in bottle height.

For an inline fuse try looking at auto parts stores or radio shack.

I highly recommend adding check valves to prevent this from happening again.

This is typical. To seal the lid blast with 30 psi to seat the lid. Keg lube will help big time you should get some a little goes a long way.

BargainFittingshas some that should work.