Search results

I have a pi3 and used the ardunio uno R3 as I couldn't find alamode anywhere for a decent price. Mine is connect via USB.

If I wouldn't have found it I would have after I saw your post. Thanks for the help though! :mug:

I'm using the Adafruit meters from Amazon. And yes I'm using them under normal dispensing pressure. I didn't have issues doing pours when I bench tested them but I was doing full pours to check the calibration. So I did some looking around and being the web browser packrat I am I found an...

So I think I have narrowed down my issue. After pulling all the wiring and rewiring and still not having any luck I pulled one flow meter to bench test and it work... I'm using the cheap flow meters and I noticed with short pours it will not register. I rewired them back up and if I take a...

Wasn't a crossover cable. I had stripped off both ends and used the bare wires soldered to meter wires. Of course I switched the cable for a thicker gauge wire. On the test with just one it worked. After I rewired my meters they are not working yet again. Not sure what my issue is at this point.

Day_Tripper thanks for the Meta Refresh tip for the temp it worked. As for the flow meters I rewired one with thicker gauge wire vs the CAT5 cable and I'm now registering pours!! Now the only thing to do is rewire the rest and sit back an enjoy the beer. Thanks for the help.

I think my issue is the length of CAT5 I have. I'll try replacing just one of the sensor wires with a larger gauge wire than the CAT5 cable to see if that fixes it before I tear it all apart.

Post #1353 shows 1500 is the right pulse count. I tested it with mine and that was the closest I saw in test pours. I'll verify the number when I get home. Problem I'm having is now with everything installed my flow meters are not working. Might be the run of CAT5 cable I used. Everything...

Got it. Post 118 for the header right I was missing the code to get to the temp sensors. Every time I tried it last night it would cut the taps out of the screen. I think I had it going to the wrong file. Works now and I have my flow meters working as well. Just have to install it in my beer...

No I've only tried Chromium. Nothing happens when I click on the thermometer as well. I put the code in for the graphic as per the instructions. I'm thinking I've missed something in the coding to put the scrolling temps in. When I go to the localhost/cgi-bin/webgui2.py I get the page with...

Need some help with my Pints. Running Rp3 with an Uno and Jessie. Can't seem to get the temps to show on the Pints page. When I run the local host/cgi-bin/webgui2.py it shows the log. Just not on the webpage on the Pints page. Thoughts?

Just a tread bump and always support your local businesses. And not a paid advertisement.

First post thought I would show my Kegerator that I have been working in the last few months while I finish brewing another batch to put in it. I got this old gal from my parents when they upgraded their kitchen. I had to of course first paint it in Seahawks colors! I pulled all the...