Search results

Regulated wineries/breweries are fine, but they only legalized home brewing in 2013. Even still they heavily restrict it: Some counties still remain "dry", you can only brew 15 gallons per quarter and no more than 15 gallons on hand at a time, and you generally aren't allowed to take it outside...

Imagine living in a state where a reasonably active brew shed is considered " definitely one of the biggest operations we’ve seen in our county and possibly our state". https://nypost.com/2020/12/18/illegal-winery-discovered-at-alabama-sewage-plant/ I feel like I've seen kits that size on...

It was a metalized on one side foam board. https://www.lowes.com/pd/Insulfoam-Common-2-in-x-4-ft-x-8-ft-Actual-2-in-x-4-ft-x-8-ft-1-R-7-7-Faced-Polystyrene-Garage-Door-Foam-Board-Insulation/3014190 I don't know that the foil look does anything for performance, but it gives the inside a...

Sorry I missed your post. I tried using a tee at the kettle drain, but I didn't like the requirement that the pump be running to know the temperature. Instead I mounted through the kettle under the basket and away from the element a bit. This has been working great. I use a hand held...

Yup, important to watch for a pop off. I guess I should have mentioned that the tubing was leftovers from my brew kettle, and the pump was only like $20 on Amazon if I remember correctly. The OP mentioned alternatives to a pump, but this approach isn’t much more expensive than anything else.

I’ve been through several versions of my eBIAB journey, including a bag with a false bottom, and want to add a plus one to Micraft’s summary. I was not happy with my results until I had open space between the element, temp probe, and grain bed, and until I had a way to keep the liquid around...

https://photos.app.goo.gl/Wtkg69Bs2kf8i7xm7

I use a small submersible pond pump to clean my lines. I have silicone tubing hooked to the outlet that just slides on to the tap nozzle, then I pull the beer line out of the kegerator and into the bucket with the BLC. Typically I’ll just unscrew the ball lock spring/pin so that more of the...

What is your budget?

If it’s just a travel container I’d go as small as possible. Transfer from keg to keg is pretty easy, and O2/headspace is less of an issue if you fill it to the top. Buying several 1 gallon kegs would be ideal. If you’re going to brew a batch specifically for the keg then I’d go 3 gallon I...

That’s not out of the norm, you can totally get there. Heat that sucker up, it’s like no2 for yeast. Try 75f first, but I bet you’ll like 80f more. If you ferment under pressure you get it carbonated at the same time, faster drinking!

How fast does this hypothetical person need to go? Are we looking for 24 hours to dry on a 1.080 juice? Or 96 hours to dry on a 1.065 juice?

I had success raising the temperature and fermenting under pressure with my ciders, although I do tend to just make sweet cider.

PT100 is the default temperature sensor for almost every PID controller. It is possible that the headphone jack they're using is wired funny, but you should be able to wire any controller to accept that plug.

If they were any less open I'd be worried about cleaning, especially clean in place. Sorry, I haven't seen one that doesn't have open coils.

https://spikebrewing.com/products/temp-control-coil This?

I don't understand this thread at all. The TSA regulation specifically calls out corrosives, the SDS for Star San correctly identifies it as corrosive, it can't fly. You have to click "accept" right after you read those words in the app while you check in. You could take a train, or mail the...

If they're close together couldn't you just add a dryer plug and a slightly longer cord to the AC so you could plug it into the same outlet as the brewery?

These are rated to boiling temp and would be easy to wire to disconnect your SSR: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F142492684940

As far as I know that approach is fairly common. You want enough volume of glycol in the loop to give the freezer enough time to keep the loop cold. (Edit) you've already got the FTSS, for sure you can keep your own glycol in a freezer. That little one you linked seems like a fun choice, I...