Search results

So I randomly bought a lathe and decided to give turning a go. So far I've made a few tap handles that turned out decently. Any other turners here?

A little background - I visited the Answer a month or two ago and have become fascinated with Randalls due to the Andall series of beers. I picked up 2 10inch water filter housing randalls and hook those up to my system for parties/events, and I couldn't be happier with the results. Here's...

This past weekend I went out to my first ever brewery release for Barrel Culture Brewing and Blending in Durham NC. The place is right around the corner from work, the brewer shops at the same homebrew shop I go to, and was incredibly friendly when I met him there. So I figure I wanna check...

Everything is now sold - Thanks Downsizing a bit, I've got a SS Brewtech Brewbucket with the thermowell and a Fast Ferment up for grabs BrewBucket has been used 2 times, I just don't need multiples of it Fastferment was used about 5 times, and started to leak a bit, but I used Silicone...

So I just brewed another back of my Migratory Coconut Stout, It's an oatmeal stout, probably the 6th time I've brewed it, and I change 1 little thing each batch to perfect it. Brewed on 5/26, checked and got: OG 1.065 - right in line 6/1 - 1.021 6/4 - 1.018 6/6 - 1.016 6/7 & 8 -...

Just spent the weekend in Asheville with the wife. We drove down for a concert at the orange peel (Jimmy Eat World) and of course to take in a few breweries. As soon as we got into town I went to Wicked Weed, then Green Man, then Burial, then over to Tasty Beverage...then things got foggy...

Hey guys like the thread says, I'm looking Funky Buddha beers, and I can get just tons of different WW sours, as well as other NC local beers. Mostly looking Little Buddha stuff, last snow, maple bacon, last buffalo etc. Let me know what you've got and we can work something out...

I've got 2 of these Double body CO2 regulators, Each with 3 connections, 1 on body 1, and a Y on body 2 - both setup exactly the same Both are holding pressure, but may need the shutoff's re-wrapped in teflon as they've been sitting a bit. Will ship on your dime - I think both will fit...

Just upgraded to a Spike Brewing kettle so I'm getting rid of my other one as I don't need it anymore. it's in fantastic shape, no dings, nicks etc, and has only been used a handful of times Bayou Classic 36qt kettle $40.00 in the located in the Garner/Clayton area of NC but I work in RTP...

So this has been discussed - but not to great length honestly. Looking at SS Brewtech's FTSs it's a great system, but I can't help but think I can do it cheaper. So I'm thinking about 3 of SS Brewtech's brew buckets - thought about a chronical, but I just can't justify the...

Hey guys, I picked up 4 older taprite regs on ebay dirt cheap to use as secondary regs in my keezer. Figure worst case scenario they need rebuilds and that'd still be cheaper than they were new. Decided to test them gradually before implementing them to my system, so added my shut-off barbed...

Recipe: Grains: 7.5 Lbs Pale Malt (2 Row) 1.5 Lbs Munic Malt - 10L 1 Lb Cara-Pils/Dextrine 1 Lb Caravienne Malt 8 oz Caramunic Malt 8 oz Special B Malt Hops: 1 oz Goldings, East Kent (60min) .5 oz Fuggles - (25min) Adjuncts: 2 large cans of Yams (1 can for mash - one 60min boil 1 lbs Grade B...

Hey guys, I'm heading down to Orlando from NC next week. Anything particular from the FL area I should be on the search for while I'm there? I've got a friend at Funky Buddha so I'm already prepped to pick up a bunch of their stuff.

I'm converting completely over to ball locks just for size factor so I'm getting rid of this pin-lock 40 bucks picked up, with both the gas and liquid fittings. Keg works great, has a universal top with a purge valve unlike the typical pin-lock tops. Located in the McGee's...

Hey guys, I'm really looking for a secondary regulator setup, preferably a 4 product, but I'd be happy with a 3 as well , just so I can run different pressures to each of my kegs. Thanks!

So I was really very happy with the Coconut stout I made last time, so much so I've had another batch just aging lying in wait for this keg to kick. Thing is I happened to notice my French oak chips, and a bottle of the wife's Malibu Coconut rum. Soaked a couple of ounces of chips in entirely...

Beer Bash Fridays :mug: "We will have these great beers on tap – please note that beer taps will be open from 3:15 to 4:45 p.m.: LEFT TAPS ARE LIGHT/SWEET Gizmo Deep Blue Saison Brooklyn Summer Ale (Spare) Green Flash Passion Fruit Kicker CENTER TAPS ARE MEDIUM/HOPPY Heavy Seas...

"Ready for some free wort at this weekend's 2nd Annual NeighBREWhood Party? We're putting together a simple batch for you. 2-Row, a little Crystal 20 malt for sweetness, and Willamette hops to add a little kick. Starting gravity should be around 1.050, with 25-30 IBUs. So, what are you...

I did a search, and didn't see this posted, thoughts ideas? https://www.youtube.com/watch?v=7f46ym0yev4 Interesting concept, and backed by whirlpool -which makes it odd that they are doing an indiegogo to me.

The wife loves penguins, and someone showed her this: Anybody have access to it? Obviously I'd be more than willing to offer up payback in the way of NC brews.