What effect do you think yeast selection has on this recipe? I already have some 2206 (Bavarian Lager) in my yeast bank and was wondering if subbing in that would be much of a difference?
I find an extract potential % for Dark Munich to be 80-83 and Light Munich to be 78-83. Seems pretty close to me, not enough to be the cause of your low gravity issues.
General rule would be that if the yeast didn't perform the way you wanted/expected it to you should not reuse it. If you are POSITIVE it is a wort issue you might be alright but I personally wouldn't risk it and would buy a fresh pack and build a new starter. This is what you really need to ask...
I disagree with the pitching rates. I have found that a big pitch actually causes Brett to ferment pretty cleanly. If you want to get those funky Brett flavors a lower pitch will stress them out and get them to start throwing those wonderful flavors/esters. A nice warm fermenter (70F-ish) also...
My experience has been that a 100% Brett fermentation isn't that much different than that of a typical ale yeast*. However you'll want some bulk aging on the Brett beer if you want those Brett characteristics to really come through. Generally I give my 100% Brett beers 1 month in the primary and...
With todays malts, most of your conversion is going to happen in the first 15-20 minutes of the mash. I would think your initial temp would have much more of an effect over the final product vs the average over the entire mash. Although I would strive to trying to maintain as constant as a temp...
This recipe was a big hit at a Halloween party we had last weekend. I served this alongside a Cream Ale and a Pale Ale and those who liked maltier beers were very happy with the Brown.
Nothing much to add other than another recommendation for the recipe ;)
I was under the impression that Stone changes the recipe for each release. And of course the old one was short on hop aroma, that is why they label it the way they do. ;)
As far as clarity, my version of this cleared up nicely with a good cold crash and some gelatin. Not sure if Stone uses a...
So I am going to be setting up this system, pretty much exactly as in the OP except I will be using a US-Solar pump to recirculate. I am not interested in doing steps (at this time) but wanted the other benefits of recirculating so this seems like the perfect budget solution. I already have a...
I like buckets for ease of cleaning. I have 5 different bucket fermenters and the one I love is the Austin Homebrew Supply 7.9 gallon bucket. Great seal, just make sure you also get the lid-removal tool. People say good seal doesn't matter because you'll have a protective layer of CO2 in there...
I keep telling people about the arrangement Russian River and Firestone-Walker made to brew up PTE at Firestone for a bit and people keep asking me "isn't Russian River afraid FSW will steal the recipe?"
Go ahead and Google "Hot Side Aeration Myth." Basic consensus is that unless you need your beer to have a 6 month+ shelf life it is a non-issue at the homebrew level. One of those brewing boogy-men that has carried over from commercial practices that isn't really applicable to homebrewing...
Getting oxygen into your wort before pitching yeast is a good thing. The yeast need that oxygen at the start of fermentation. Your "hot side oxidation" is not causing your issues and if you don't have a good method to oxygenate your wort prior to pitching yeast, vigorous stirring is a good...
Could it be as simple as how you poured it into the glass? Most people pour down the side of the glass to reduce foaming but really you should be pouring straight down the middle. Sometimes for me that method can release TOO many bubbles so I start going down the side then switch to down the...
Not too necro and old post, but...
The term cider is specifically for fermented beverages made out of apples. A "cider" made of pears is called perry. Pretty sure a fermented drink made out of cherries would just be a cherry-wine (or sparkling cherry-wine if it has bubbles).
Not that terms...