Recent content by odie313

wps-hbt
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. O

    Wanted Grain Mill

    Are you still looking for a grain mill?
  2. O

    CO2 regulator stuck at full power

    ..
  3. O

    HOWTO - Make a BrewPi Fermentation Controller For Cheap

    Besides the uno or the Leonardo, will any other arduino's work with the brewpi?
  4. O

    Secondary regulater. High or low pressure.

    Yes, that is what I meant. I would have liked to just run a hose directly from the tank, however it sounds like it would be safer to have a primary regulater connected, then run a low pressure hose to the low pressure secondary.
  5. O

    Secondary regulater. High or low pressure.

    LLbeanJ is correct, my plan is to have the tank on the outside of the freezer. I wouldn't want to drill more than one hole thru the collar for the secondary lines.
  6. O

    Secondary regulater. High or low pressure.

    Thanks for the reply, I have decided to go with the low pressure secondary regulators.
  7. O

    Secondary regulater. High or low pressure.

    Duplicate.
  8. O

    Secondary regulater. High or low pressure.

    So, it sounds like if I use low pressure secondary; I would only need to set the primary regulater pressure to the highest pressure I plan on serving. For example, If I'm doing carbonated water for sodas, and a couple of kegs for beer. I would set the secondary for the water at 30 psi, since it...
  9. O

    Secondary regulater. High or low pressure.

    I am building my keezer and I am not sure if I should go with a low pressure or a high pressure system. I plan on having the tank on the outside of the keezer. I would like to be able to have the availability of different serving pressure for the different styles of beer I plan on brewing. I...
  10. O

    Cream Ale Cream of Three Crops (Cream Ale)

    I understand that DMS comes out in the boil. I was wondering how can it be taken out if I keg, like Brewski mentions in the post above.
  11. O

    Cream Ale Cream of Three Crops (Cream Ale)

    I started the ferment at 64F for the first 12 hours then raised it to 68f. Its been fermenting away for the past four days. How exactly would I scrub the DMS out of the beer, if it does appear in the final product.
  12. O

    Cream Ale Cream of Three Crops (Cream Ale)

    Just brewed a 10 gallon BIAB batch of this today, unfortunately I had some problems along the way. First while grinding the grain, the mill decides to flip and dump about a cup of grain on the floor. Second problem, a 15 gallon kettle is not big enough for a 10 gallon batch. And finally; my mash...
  13. O

    We want YOUR feedback on our new site, HBT! -- Kegconnection

    Under components > regulators, your In-house Chudnow regulators only list the add-a-body style. The primary regulators are not accessible from the new site.
  14. O

    We want YOUR feedback on our new site, HBT! -- Kegconnection

    Would be glad to test.
  15. O

    Brew your own subscription

    Interested, please send information.
See more
Back
Top