Finally at this point I installed the 3 1/8" Shanks by measuring where I wanted each shank and used a 1" hole saw to drill through the diamond plate, aluminum wall, 3/4" ply, 1x4 pine support, expanded foam and the FRP back. And the bit I bought worked great. I pushed just until the drill bit...
****ATTEMPT AT YOUR OWN RISK****
I am not an electrician but I am trained with wiring and electronics repair for the US Navy so I am comfortable with this stuff. If you are not DO NOT ATTEMPT before I installed the ITC's I painted the front of the doors.
ITC-1000 Wiring
Here is my electrical...
The next part is the doors. These are one of the first things I envisioned. I wanted the whole kegerator to be very nice and clean. I saw slot of builds where the foam was exposed. You have to remove the plastic shelves in order to fit 4 kegs and an large enclosed lower fermentation chamber. How...
So for the fermentation side. I took my 6.5 Gallon Carboy and Bucket to measure the height I wanted the chamber at the bottom to fit my biggest fermentation vessel. It just so happened the fit was the same at the top chamber and the bottom. It also will fit a corny keg in the chambers if need...
Ok well I wanted to share my Kegerator Build. User Sidman's build located here:https://www.homebrewtalk.com/showthread.php?t=524849
and User: mistercamerons fridgenstien build: https://www.homebrewtalk.com/showthread.php?t=289241
was my inspiration for the build. He is a great dude and helped...
I'm trying to move the temp controls over to the freezer side. The fridge was designed for some reason to only cycle on when the fridge needed to cool. I am wiring it up so it turns on when the freezer needs to cool. The STC on the fridge side will "steal" cool air from the freezer when it needs...
I agree the thermostat for the fridge probably just controls the freezer compressor and evap fan. The evap fan is on the freezer side pushes air through a channel that blows into the fridge. The freezer control know opens and closes a damper with a mechanical linkage arm.
I'm thinking if I just...
OK so there are 2 controls. But the only one with a thermostat is the fridge side. The freezer control just opens and closes the air damper by a mechanical linkage. I'm guessing the thermostat for the fridge actually controls the compressor by turning it on when the fridge warms up and the evap...
OK so I've done weeks of research and when a fridge fell in my lap it all went out the door. So here it is I have the Kenmore Coldspot 106.53632300. When I opened up the control panel I found one thermostat for the refrigerator side and a knob control for the air damper on the freezer side...
OK so here it is. I'm attempting the side by side kegerator/ferm chamber build. Now let me start by saying I've probably read every side by side thread I could find. I've researched weeks daily to understand this build inside and out. We'll a fridge fell into my lap and through almost all of my...
OK so here it is. I'm attempting the side by side kegerator/ferm chamber build. Now let me start by saying I've probably read every side by side thread I could find. I've researched weeks daily to understand this build inside and out. We'll a fridge fell into my lap and through almost all of my...